توضیحات
ترجمه آماده – روش های کالیبراسیون در آنالیز مستقیم نمونه های جامد بوسیله اسپکترومتری جذب اتمی الکتروترمال (حرارتی-برقی)
Methods of calibration in the direct analysis of solid samples by electrothermal atomic absorption spectrometry
روش های کالیبراسیون در آنالیز مستقیم نمونه های جامد بوسیله اسپکترومتری جذب اتمی الکتروترمال (حرارتی-برقی)
Abstract-One of the major problems involved in the direct analysis of solid samples by electrothermal atomic absorption spectrometry (ETAAS) lies in the calibration step because non-spectral interference effects are often pronounced. Three standardization techniques have been described and used in solid sampling-ETAAS: (i) standard additions method; (ii) calibration relative to a certified reference material; and (iii) calibration curve technique. However, an adequate statistical evaluation of the uncertainty in the analyte concentration in the solid sample is most frequently neglected, and reported errors may be seriously underestimated. This can be attributed directly to the complexity of the statistical expressions required to accurately account for errors in each of the calibration techniques mentioned above, and the general lack of relevant reference literature. The object of this work has been to develop a computer package which will perform the necessary statistical analyses of solid sampling-ETAAS data; the result is the program “SOLIDS” described here in the form of an electronic publication in Spectrochimica Acta Electronica, the electronic section of Spectrochimicn Acta Part B. The program could also be useful in other analytical fields where similar calibration methods are used. The hard copy text, outlining the calibration models and their associated errors, is accompanied by a diskette containing the program, some data files, and a manual. Use of the program is exemplified in the text, with some of the data files discussed included on the diskette which, together with the manual, should enable the reader to become familiarized with the operation of the program, and the results generated.
چکیده- یکی از عمده ترین مشکلاتی که در آنالیز مستقیم نمونه های جامد بوسیله اسپکترومتری جذب اتمی الکتروترمال (ETAAS) روبرو هستیم آنالیز در مرحله کالیبراسیون می باشد چرا که اغلب بوسیله آن، اثرات تداخلی غیر-طیفی رخ می دهند. سه تکنیک استانداردسازی در نمونه برداری جامد-ETAAS شرح و استفاده شده است: ۱) روش افزودنی های استاندارد ۲) کالیبراسیون نسبت به ماده مرجع مجاز و ۳) تکنیک منحنی کالیبراسیون. هرچند، ارزیابی آماری کافی در مورد خطای تخمینی در غلظت آنالیت نمونه جامد، نادیده گرفته شده است و ممکن است خطاهای گزارش شده بطور جد دست کم گرفته شده باشند. این قضیه را میتوان مستقیما به پیچیدگی بیان آماری مورد نیاز برای محاسبه دقیق خطاها در هر تکنیک کالیبراسیون اشاره شده در بالا هم چنین عدم وجود مقالات مرجع مرتبط با آن نسبت داد. موضوع مطالعه ما، معرفی یک بسته کامپیوتری است که آنالیز آماری ضروری برای داده های نمونه برداری جامد-ETAAS را انجام میدهد. نتیجه، برنامه ‘SOLIDS’ شرح داده شده در اینجا به شکل چاپ الکترونیکی در Spectrochimica Acta Electronica ، بخش الکترونیکی ، پارت B می باشد. کپی متن هارد که به مدل های کالیبراسیون و خطاهای مربوط به آنها اشاره دارد، بوسیله دیکست حاوی برنامه، فایل های دیتا و کتاب راهنما انجام می شود. استفاده از برنامه در متن با مثال نشان داده می شود، و برخی از فایل های دیتا بحث شده روی دیسکت قرار می گیرند که همراه با کتاب راهنما باید خواننده را به عملیات برنامه و نتایج بدست آمده آشنا نمایند.
دوست عزیزم چنانچه برای دانلود ترجمه آماده – روش های کالیبراسیون در آنالیز مستقیم نمونه های جامد بوسیله اسپکترومتری جذب اتمی الکتروترمال (حرارتی-برقی) با مشکلی مواجه شدید با شماره ۰۹۳۵۷۲۵۸۴۲۵ یا ایمیل info@pajuha.ir ارتباط برقرار کنید.
ترجمه آماده -Methods of calibration in the direct analysis
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.